[PSUBS-MAILIST] Foam preperation

hank pronk via Personal_Submersibles personal_submersibles at psubs.org
Thu Jun 27 13:50:02 EDT 2019


 Brian,I hope it will flow in, in time.  If you want, make a little sample and sent it to me and I will pressure test it for you in water.  I can also do a dive with it attached to the sub.  I will be testing my sample sucker at 250 feet soon, so if you want send it soon.HankHank
    On Thursday, June 27, 2019, 9:45:44 AM MDT, Brian Cox via Personal_Submersibles <personal_submersibles at psubs.org> wrote:  
 
 Hank,          It stays liquid for about 45 seconds  .
Brian


--- personal_submersibles at psubs.org wrote:

From: hank pronk via Personal_Submersibles <personal_submersibles at psubs.org>
To: Brian Cox via Personal_Submersibles <personal_submersibles at psubs.org>
Subject: Re: [PSUBS-MAILIST] Foam preperation
Date: Thu, 27 Jun 2019 06:19:32 +0000 (UTC)

 Brian,Is it runny enough to flow through your holes and into the void?Hank
    On Wednesday, June 26, 2019, 9:30:03 PM MDT, Brian Cox via Personal_Submersibles <personal_submersibles at psubs.org> wrote:  
 
 Hi everybody,                                   I poured a small test piece of that 16 lb foam, man that stuff  gets as hard as a rock !  very dense , and very light.   This pouring of the foam is not going to be as straight forward as I thought,  The barrier to contain the foam is working out good, I'm just using wood and thin  1/8" luan ,  then I'm covering that with 4 mil flexible plastic ( heavy garbage type bag)  so the foam won't stick to it.  But I'm worried that any little gaps I have and the liquid foam might run out the bottom of those areas before it starts foaming, so I'm cramming big blankets ( cheap moving blankets from harbor freight)  in tight to contain any foam.  That way I can get the cavity that I'm trying to fill completely maxed out.  Waiting for an 80 + degree day  .   
Brian


--- personal_submersibles at psubs.org wrote:

From: Brian Cox via Personal_Submersibles <personal_submersibles at psubs.org>
To: "Personal Submersibles General Discussion" <personal_submersibles at psubs.org>
Subject: Re: [PSUBS-MAILIST] Foam preperation
Date: Mon, 24 Jun 2019 16:12:46 -0700

My first batch of foam cam today !  yay !   two five gallon pails, A and B,  should be interesting !
Brian


--- personal_submersibles at psubs.org wrote:

From: hank pronk via Personal_Submersibles <personal_submersibles at psubs.org>
To: Brian Cox via Personal_Submersibles <personal_submersibles at psubs.org>
Subject: Re: [PSUBS-MAILIST] Foam preperation
Date: Fri, 21 Jun 2019 17:47:56 +0000 (UTC)

 Brian,Did you find foam to fill the void?Hank
    On Thursday, June 20, 2019, 8:30:55 PM MDT, Brian Cox via Personal_Submersibles <personal_submersibles at psubs.org> wrote:  
 
 Kind of unnerving drilling holes in my boat !

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
  _______________________________________________Personal_Submersibles mailing listPersonal_Submersibles at psubs.orghttp://www.psubs.org/mailman/listinfo.cgi/personal_submersibles_______________________________________________Personal_Submersibles mailing listPersonal_Submersibles at psubs.orghttp://www.psubs.org/mailman/listinfo.cgi/personal_submersibles_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
  _______________________________________________Personal_Submersibles mailing listPersonal_Submersibles at psubs.orghttp://www.psubs.org/mailman/listinfo.cgi/personal_submersibles_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20190627/87a2f6d6/attachment.html>


More information about the Personal_Submersibles mailing list