[PSUBS-MAILIST] Browne & Sharp Turret Lathe (Saint Paul)

Pete Niedermayr via Personal_Submersibles personal_submersibles at psubs.org
Mon Jun 24 17:46:45 EDT 2019


Do you think a chuck could be added ?
 

    On Monday, June 24, 2019, 12:01:28 PM GMT, hank pronk via Personal_Submersibles <personal_submersibles at psubs.org> wrote:  
 
  Hi Pete,Hmmm, I just had another look with a full screen picture.  It is pretty limited with no chuck.  I would still take it but it is likely not worth it for you.Hank
    On Monday, June 24, 2019, 5:02:54 AM MDT, Pete Niedermayr via Personal_Submersibles <personal_submersibles at psubs.org> wrote:  
 
 Is this worth it to pickup? It will probably cost me a couple hundred bucks to get home. Though I might not be able to make alot (any) useful parts. Is it worth it to lean the basics of using a lathe?

Pete


Browne & Sharp Turret Lathe

| 
| 
| 
|  |  |

 |

 |
| 
|  | 
Browne & Sharp Turret Lathe

1905 Browne & Sharp Turret Lathe. Free but you must pay for removal. We have freight elevator and loading dock.
 |

 |

 |



_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
  _______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20190624/405a768f/attachment.html>


More information about the Personal_Submersibles mailing list