[PSUBS-MAILIST] SeaQuestor Progress - Exoskeleton

[Alan via Personal_Submersibles]

Great progress David,
must be a good feeling seeing it start to materialise.
Alan

> On 2/07/2019, at 12:52 PM, David Colombo via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
> 
> Hi Guys, worked on foam forms on the exoskeleton this weekend. Started to move them from the jig to dry fitting on the pressure hull. I knew that I was going to have to raise the landing platform on the trailer by 6" so that the wings would clear the fender wells. Looks like I will have to remove the fenders temporarily until i get my hoist up and assembled to lift the hull off the trailer.  Starting look like the real thing now.
> Also mocked up the rear thrusters on the jig to work out the linkage configuration.
> 
> 
> Best Regards 
> David
> 
> 
> <Image2969351554216719143.jpg>
> <Image3531607494963682141.jpg>
> <Image5927798013761447353.jpg>
> <Image4572123273853740996.jpg>
> <Image7438924220815856783.jpg>
> <Image8431856905453088399.jpg>
> <Image4276386800710411156.jpg>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles