[PSUBS-MAILIST] SeaQuestor progress.

[T Novak via Personal_Submersibles]

David,

After shaping the foam I take it that you will be glassing over top of it.  Are you planning a female mold for the external hull surface?  Otherwise, how do you get a shiny gelcoat finish?

Tim

 

From: Personal_Submersibles [mailto:personal_submersibles-bounces at psubs.org] On Behalf Of David Colombo via Personal_Submersibles
Sent: Saturday, January 5, 2019 4:31 PM
To: Personal Submersibles General Discussion <personal_submersibles at psubs.org>
Subject: [PSUBS-MAILIST] SeaQuestor progress.

 

Hi guys, I aquired 380cf (4) 4ft x 3ft x 8ft blocks of foam for the exoskeleton shaping process. First I need to build the platform for the (16) station ribs to be attached at 12" o.c. The station ribs have been cnc cut from 3/4" plywood and are hanging on the wall ready to be assembled.  Then build a hot wire cutting rig to slice the foam into 11.25" wide blocks. Then the shaping process can begin. 

David

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20190105/64daf846/attachment.html>