[PSUBS-MAILIST] (no subject)

Alan via Personal_Submersibles personal_submersibles at psubs.org
Thu Dec 12 20:07:05 EST 2019


Hank,
that sounds a good plan. In my thrusters I send my compensating oil down
the wiring tube.
Alan

> On 13/12/2019, at 1:42 PM, hank pronk via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
> 
> Alan,
> Thanks', I drill oil passages in the actuator body to allow free flow of the oil.  I also now use the oil lines to house the power wires, thus eliminating penetrators.  I have a oil filled manifold with a single 8 wire penetrator to send power to the actuators.  The manifold is connected to a  suspension air bag full of oil.  There is also a vent plug in the actuator to allow for oil filling.
> Hank
> 
> 
> On Thursday, December 12, 2019, 4:48:19 PM MST, Alan via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
> 
> 
> Congratulations Hank.
> How did you go about the oil compensating of the manipulators?
> Alan
> 
>> On 13/12/2019, at 11:25 AM, Alec Smyth via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
>> 
>> Go Hank!!! BTW for the rest of you, Hand and I have a little initiative underway. I'm planning of brazenly copying his design to equip Shackleton with an arm. The deal is I'll make blueprints to do so, and they'll get posted as an open source manipulator design when done.
>> 
>> Best,
>> Alec
>> 
>> On Thu, Dec 12, 2019 at 4:28 PM hank pronk via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
>> Thanks David, it should work now
>> Hank
>> 
>> On Thursday, December 12, 2019, 1:49:25 PM MST, David Colombo via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
>> 
>> 
>> Hi Hank, the link is listed as private.
>> Best Regards,
>> David Colombo
>> 
>> 804 College Ave
>> Santa Rosa, CA. 95404
>> (707) 536-1424
>> www.SeaQuestor.com
>> 
>> 
>> 
>> On Thu, Dec 12, 2019 at 11:48 AM hank pronk via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
>> Here is a short video of my new all aluminum are for E3000
>> Hank
>> 
>> ----- Forwarded Message -----
>> From: marta duffek <mp13 at live.ca>
>> To: "hanker_20032000 at yahoo.ca" <hanker_20032000 at yahoo.ca>
>> Sent: Thursday, December 12, 2019, 12:46:28 PM MST
>> Subject:
>> 
>> https://youtu.be/Lm2smSqGs94
>> https://youtu.be/Lm2smSqGs94 
>> _______________________________________________
>> Personal_Submersibles mailing list
>> Personal_Submersibles at psubs.org
>> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>> _______________________________________________
>> Personal_Submersibles mailing list
>> Personal_Submersibles at psubs.org
>> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>> _______________________________________________
>> Personal_Submersibles mailing list
>> Personal_Submersibles at psubs.org
>> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>> _______________________________________________
>> Personal_Submersibles mailing list
>> Personal_Submersibles at psubs.org
>> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> 
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20191213/785aa9e7/attachment-0001.html>


More information about the Personal_Submersibles mailing list