[PSUBS-MAILIST] trailer

[hank pronk via Personal_Submersibles]

 David,Do you mean the curved body panel?    The truster goes at the back of that curve and is raked.  The indent in the body helps protect the truster.
Hank
    On Monday, August 26, 2019, 4:38:40 PM MDT, David Colombo via Personal_Submersibles <personal_submersibles at psubs.org> wrote:  
 
 Hank, Thats cool. What is the a soft arc area below the ballast tanks?Best Regards,
David Colombo

804 College Ave
Santa Rosa, CA. 95404
(707) 536-1424
www.SeaQuestor.com



On Mon, Aug 26, 2019 at 2:10 PM hank pronk via Personal_Submersibles <personal_submersibles at psubs.org> wrote:

Hi All, A few days ago I built an   inter shop sub transporter to move E3000 from my fab shop to my assembly shop.  This will make life much easier being able to go back and forth because I won't have to heat two shops when its -20C here.Hank_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20190826/71e6ce1e/attachment.html>