[PSUBS-MAILIST] solenoid valves

hank pronk via Personal_Submersibles personal_submersibles at psubs.org
Mon Apr 15 18:19:05 EDT 2019


 Alan,If I were in salt water I would worry about corrosion also, but in fresh water they are fine.  Having said that, I will make an oil filled enclosure.  There is not a serious risk if a valve failed.  Gamma can surface with the drop weight and the escape pod bladder.Hank
    On Monday, April 15, 2019, 3:28:25 PM MDT, Alan via Personal_Submersibles <personal_submersibles at psubs.org> wrote:  
 
 Hank,I have solenoid valves in my ambient & they worked really well.I controlled them off a PlayStation 2 controller.Mine were designed for air & were a quick solution at the time.I have pulled a few apart & the internal parts are susceptible to Corrosion. A diaphragm spring comes to mind.Yours may be different. I have designed a home made version that I am hoping will be more robust.Alan
On 16/04/2019, at 8:35 AM, hank pronk via Personal_Submersibles <personal_submersibles at psubs.org> wrote:


Hi All,When we were in Lake Tahoe, Alec asked if I get an air lock in my MBT vent lines.  I said no, but that got me thinking, and I may not have realized that I was getting a air lock.  Normally I dive Gamma heavy with no issues but  at Lake Tahoe I was diving very close to neutral.  The problem I was having at Lake Tahoe, was the sub leaning uncomfortable while submerging.  I blame that on the weight of the sub and since the sub was light it could not push the water out of the vent lines casing a blockage.  I like diving closer to neutral now so I installed 4 solenoid vent valves as an experiment.  It has solved the problem completely.  In fact I only need two valves to make it sink perfectly now.  With all four valves open plus the two original valves open, the sub dives in 1 min and 30 seconds.  Slow compared to Alec's sub but good for Gamma.
My next challenge is to install a bigger port in E3000.  First I am planning a proper poured concrete test pool in my new shop.  Then I will dive E3000 a couple million times in the pool.  Then I can work on a larger port assembly.Hank

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20190415/b2b38cf4/attachment.html>


More information about the Personal_Submersibles mailing list