[PSUBS-MAILIST] pneumatic HP manifold

[Cliff Redus via Personal_Submersibles]

 Jon, see attached ballast circuit diagram for my boat.  I use Swagelok fitting, valves and SS tubing to build all HP air and O2 manifolds. Swagelok fittings are available on Ebay at a fraction of their retail cost.  Can easily spec part at their website https://www.swagelok.com/en.  Also you an requested the Swagelok manual for free which is also good way to get the right part number. HP SS tubing is readily available at many sources in including Grainger stores also any store that sells hydraulic supplies has SS tubing.
Cliff
    On Sunday, April 7, 2019, 4:58:45 PM CDT, Jon Wallace via Personal_Submersibles <personal_submersibles at psubs.org> wrote:  
 
 
Where are people sourcing their manifolds for HP ballast air?  I'm having a difficult finding anything in the 3500 to 5000 range._______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20190408/da6a57a5/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: R300-D02-002  Ballast Circuit.pdf
Type: application/pdf
Size: 77127 bytes
Desc: not available
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20190408/da6a57a5/attachment-0001.pdf>