[PSUBS-MAILIST] pneumatic HP manifold

[Jon Wallace via Personal_Submersibles]

Two 80 cu ft Aluminum tanks inside the cabin.  What did you use for a pressure reducer?

      From: Rick Patton via Personal_Submersibles <personal_submersibles at psubs.org>
 To: Personal Submersibles General Discussion <personal_submersibles at psubs.org> 
 Sent: Sunday, April 7, 2019 7:16 PM
 Subject: Re: [PSUBS-MAILIST] pneumatic HP manifold
   
JonAre your tanks inside or out?Mine are outside and I break them down to LP before they come inside so I just made my own custom  SS pipe manifold using schedule 40 pipe.Rick
On Sun, Apr 7, 2019 at 12:59 PM Brian Cox via Personal_Submersibles <personal_submersibles at psubs.org> wrote:

McMaster Carr 

--- personal_submersibles at psubs.org wrote:

From: Jon Wallace via Personal_Submersibles <personal_submersibles at psubs.org>
To: Personal Submersibles General Discussion <personal_submersibles at psubs.org>
Subject: [PSUBS-MAILIST] pneumatic HP manifold
Date: Sun, 7 Apr 2019 21:57:34 +0000 (UTC)


Where are people sourcing their manifolds for HP ballast air?  I'm having a difficult finding anything in the 3500 to 5000 range._______________________________________________Personal_Submersibles mailing listPersonal_Submersibles at psubs.orghttp://www.psubs.org/mailman/listinfo.cgi/personal_submersibles_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles


   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20190408/fc661034/attachment.html>