[PSUBS-MAILIST] transducer

[Al Secor via Personal_Submersibles]

Brian,
Actually what hank is talking about is audio frequency, 10khz, ultrasonic.  Most antenna analyzers won't go below 160 meters which is about 1.8Mhz RF.  They are also designed for 50 ohm impedance which I am sure the transducer isn't even close to.
Hank,
Your best bet would be to go directly to the manufacturer who made the radio since the output stage would be tuned for the specific transducer used.  Ultrasonic transducers vary in configuration are are specific to a given design.  Maybe Delta Oceanographics can give you some info.  Al Secor

      From: Brian Cox via Personal_Submersibles <personal_submersibles at psubs.org>
 To: Personal Submersibles General Discussion <personal_submersibles at psubs.org> 
 Sent: Sunday, May 13, 2018 2:04 PM
 Subject: Re: [PSUBS-MAILIST] transducer
   
Hank,          It's still RF energy correct?    It may be able to give you an accurate reading of what it is giving off in terms of radio frequency.    I'm going to be testing an antenna for my sailboat in a couple of days over at a friends house.  I'm using the backstay cable (7 mm) which we are going to simulate how it would be on the sailboat.   The cable is about 33' long and will have insulators in between where it connects to the boat.  The cable will be "end feed" , which is not ideal for a good antenna but can be compensated for with a antenna tuner.  I'll talk to my friend about your transducer situation.   AM frequency is around 1000 KHz. Brian   

--- personal_submersibles at psubs.org wrote:

From: hank pronk via Personal_Submersibles <personal_submersibles at psubs.org>
To: Brian Cox via Personal_Submersibles <personal_submersibles at psubs.org>
Subject: Re: [PSUBS-MAILIST] transducer
Date: Sun, 13 May 2018 15:40:46 +0000 (UTC)

 Brian, what is that?  The transducer is for under water.Hank

    On Sunday, May 13, 2018, 9:28:42 AM MDT, Brian Cox via Personal_Submersibles <personal_submersibles at psubs.org> wrote:  
 
 Hank,         I wonder if an antenna analyzer might work ? Brian 

--- personal_submersibles at psubs.org wrote:

From: hank pronk via Personal_Submersibles <personal_submersibles at psubs.org>
To: Personal Submersibles General Discussion <personal_submersibles at psubs.org>
Subject: [PSUBS-MAILIST] transducer
Date: Sun, 13 May 2018 13:46:02 +0000 (UTC)

HI All,I am looking for a 10Hz transducer for my coms.  Does anyone know how to test a transducer to determine if it is 10Hz or 27Hz.Hank_______________________________________________Personal_Submersibles mailing listPersonal_Submersibles at psubs.orghttp://www.psubs.org/mailman/listinfo.cgi/personal_submersibles_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
  _______________________________________________Personal_Submersibles mailing listPersonal_Submersibles at psubs.orghttp://www.psubs.org/mailman/listinfo.cgi/personal_submersibles_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles


   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20180513/fcd3b6df/attachment.html>