[PSUBS-MAILIST] SeaQuestor Fabrication

[Steve McQueen via Personal_Submersibles]

Very cool!  Nice beard also : )
Thanks,
Steve

---- David Colombo via Personal_Submersibles <personal_submersibles at psubs.org> wrote: 
>  Hi Guys,
> Well after many years of planning and talking and sketching and engineering
> The SeaQuestor is finally under construction. While my Youtube channel is
> under construction as well I'm not supposed to let the cat out of the bag
> so to speak, but I figured that did not include my Psub Community. All
> pressure hull parts were cut on the plasma cadcam table last week and the
> first hull section was bump and rolled. Friday we will be shaping the cone
> section of the hull and the sails. The ASME welding shop is prepping for
> the parts arrival in the next couple of weeks for fit and finish and lots
> of welding. Stay tuned for videos of the complete build process once we
> launch the SeaQuestor Youtube channel.
> 
> 
> Best Regards,
> David Colombo
> 
> 804 College Ave
> Santa Rosa, CA. 95404
> (707) 536-1424
> www.SeaQuestor.com