[PSUBS-MAILIST] K-250 HP Manifold Example

[Steve McQueen via Personal_Submersibles]

Yeah. I think the feedback was pretty one sided and made sense. 

 

From: Personal_Submersibles [mailto:personal_submersibles-bounces at psubs.org] On Behalf Of hank pronk via Personal_Submersibles
Sent: Monday, January 22, 2018 6:14 PM
To: Steve McQueen via Personal_Submersibles <personal_submersibles at psubs.org>
Subject: Re: [PSUBS-MAILIST] K-250 HP Manifold Example

 

Steve,

Nice, and I see thread tape ;-)

Hank

 

On Monday, January 22, 2018, 3:27:09 PM MST, Steve McQueen via Personal_Submersibles <personal_submersibles at psubs.org <mailto:personal_submersibles at psubs.org> > wrote: 

 

 

Forwarding with an updated subject.

 

-----Original Message-----

From: Steve McQueen [mailto:psub101 at indy.rr.com <mailto:psub101 at indy.rr.com> ] 

Sent: Tuesday, January 16, 2018 7:07 PM

To: 'Personal Submersibles General Discussion'

<personal_submersibles at psubs.org <mailto:personal_submersibles at psubs.org> >

Subject: Emailing: IMG_20180115_210324763[1]

 

All, I am sharing a photo of my HP manifold build. All my K-250 HP plumbing

is centralized here. Fits between 2 frames and the whole mounting

bracket/assembly is easily removed for maintenance. Not too big, but spread

out enough to easily operate. Fed by 2 independent external scuba  bottles

through one way check valves. Control output valves to fwd/aft soft ballast

tanks. Isolation output valve to BIBS. Manifold pressure gauge. 

 

I am also locating the O2 flow meter on this mounting bracket.

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org <mailto:Personal_Submersibles at psubs.org> 
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20180122/e8846ed3/attachment-0001.html>