[PSUBS-MAILIST] pressure test

[Alan via Personal_Submersibles]

Hank,
probably me advising caution about pressurising the LED drivers
as most I've seen have large electrolytic capacitors that can be
crushed under pressure. 
Alan

Sent from my iPad

> On 15/04/2018, at 8:04 AM, hank pronk via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
> 
> Today I pressure tested my LED light circuit board to see if it can handle the pressures Scott's P6 will see.  I am happy to report the circuit board survived one hr at 3,000 psi soaking in oil.  I was very cautious, because I kept hearing Hugh yelling at me from NZ  at least I think it was Hugh.  I stayed in Gamma and the pressure chamber was under Gamma while I pressured it up.  
> Hank
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20180415/9ae60e7e/attachment.html>