[PSUBS-MAILIST] Mechanical arms in general

[hank pronk via Personal_Submersibles]

Brian,I saw that video, I think it was Nekton Alpha.  You can make a simple Q-ball arm with a Q-ball and a ball valve.   You might be able to make the socket also, with your radius tool.  It is pretty simple if you can machine that darn socket.  I can send you a picture of the socket assembly from Gamma.  Hank 

    On Tuesday, March 21, 2017 11:35 PM, Brian Cox via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
 

 I wish I could find that video of the cue ball arm !  I think it was an old Delta sub in the 60's off Catalina island.

Brian


--- personal_submersibles at psubs.org wrote:

From: Michael Holt via Personal_Submersibles <personal_submersibles at psubs.org>
To: Personal Submersibles General Discussion <personal_submersibles at psubs.org>
Subject: [PSUBS-MAILIST] Mechanical arms in general
Date: Tue, 21 Mar 2017 16:30:34 -0400

Has anyone developed a generic mechanical arm?  It seems to me that 
there should be a set of plans for this sort of thing.

(I was about 12 when I built one out of my old Erector set but there are 
no photos.  My parents reacted a bit strongly to my chasing the cat with 
the thing and I had to disassemble the device..)


Mike


---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus


_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles


_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles


   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20170322/782d09d6/attachment.html>