[PSUBS-MAILIST] coax

Sat Jan 28 03:43:59 EST 2017

Brian, all

Minimum order of 12 is okay . There are some 20 in my sub. (and 100 in Euronaut..)

I Order them at 50 a time. I  sell them for Euro 9,- each at a min. order of 10. But that is only in Europe.

Br, Emile

Van: Personal_Submersibles [mailto:personal_submersibles-bounces at psubs.org] Namens Brian Cox via Personal_Submersibles
Verzonden: vrijdag 27 januari 2017 19:29
Aan: Personal Submersibles General Discussion
Onderwerp: Re: [PSUBS-MAILIST] coax

I have contacted the California rep for the blue globe company , Conta-Clip The parent company is PFLITSCH in Germany.  The BlueGlobe is all metric  

There is a catalogue on this page: 

http://contaclipinc.com/products/range-of-products-us/cord-grips.html

I am trying to order one of these cable compression fittings that will accommodate a 5mm coax cable and have a 1/2" npt male treads on the other side, they make the part the only problem is they want a minimum of 12 units to bring in rather than just order one or two.  They are $12.00 a piece .  The rep for California is trying to pull some strings for me since I only need a couple.  

Here's the parent company:

 https://www.pflitsch.de/en/cable-glands/

Brian 

--- personal_submersibles at psubs.org wrote:

From: David Colombo via Personal_Submersibles <personal_submersibles at psubs.org>
To: Personal Submersibles General Discussion <personal_submersibles at psubs.org>
Subject: Re: [PSUBS-MAILIST] coax
Date: Fri, 27 Jan 2017 09:13:03 -0800

Hi Emile,

I have two questions. Does  the BG216 use an oring seal?  Are you placing a BG on each side of your thruhull plate? The thru hull plate I am using is 3/4" thick, so it appears that I have the thickness to accommodate one on each side.

Best Regards,
David Colombo
  <http://static.squarespace.com/static/533310a9e4b0fba62008a464/t/5339c1f2e4b041bac4e25d1b/1396294132055/?format=500w> 
804 College Ave
Santa Rosa, CA. 95404
(707) 536-1424
www.SeaQuestor.com

On Wed, Jan 25, 2017 at 11:20 AM, emile via Personal_Submersibles <personal_submersibles at psubs.org> wrote:

Brian, 

We always use Pflitsch Blueglobe  (BG 216 MS)  for cable 5 to 11 mm.

They are officially rated for 15 Bar but the fail  at 80 bar single and 140 Bar back to back!

Yes, just thread the cable tru. For a cable with a connector like a Humminbird sonar, you have to cut the cable.

Br, Emile

Van: Personal_Submersibles [mailto:personal_submersibles-bounces at psubs.org] Namens Brian Cox via Personal_Submersibles
Verzonden: woensdag 25 januari 2017 19:56
Aan: Personal Submersibles General Discussion
Onderwerp: Re: [PSUBS-MAILIST] coax

Hank,  When you interrupt the shielding like that it messes up the wave propagation .   

Emile,  Do those fitting essentially just squeeze the cable really tight?   Is there a manufacturer that is recommended?   My cable is 200 thousandths ( 5mm) diameter thick, and is RG59     I guess I could just thread the cable through without cutting into it? No?

Brian   

--- personal_submersibles at psubs.org wrote:

From: hank pronk via Personal_Submersibles <personal_submersibles at psubs.org>
To: Personal Submersibles General Discussion <personal_submersibles at psubs.org>
Subject: Re: [PSUBS-MAILIST] coax
Date: Wed, 25 Jan 2017 18:35:25 +0000 (UTC)

Brian,

I have made a two wire penetrator for coax, just but an adaptor that goes from coax to two wires.  Emile's plan is less work though.

Hank

On Wednesday, January 25, 2017 5:45 AM, hank pronk via Personal_Submersibles <personal_submersibles at psubs.org> wrote:

I was very surprised to receive a phone call on my cell sealed up inside Gamma.

Hank

On Wednesday, January 25, 2017 4:46 AM, Brian Cox via Personal_Submersibles <personal_submersibles at psubs.org> wrote:

Hi All,

                  Been installing my ship to shore VHF marine radio.  what is a good way to run the coax thru without having to get the manufactured connectors,  Those things are kind of pricey !    

Brian

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

_______________________________________________ Personal_Submersibles mailing list Personal_Submersibles at psubs.org <http://eonapps/ft/wm/page/compose?send_to=Personal_Submersibles%40psubs.org>  http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles 
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

_______________________________________________ Personal_Submersibles mailing list Personal_Submersibles at psubs.org http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20170128/35e6f004/attachment-0001.html>