[PSUBS-MAILIST] Minn-Kota Shaft Seals

[Jon Wallace via Personal_Submersibles]

It is on the RIPTIDE MK101 although it looks like you'd have to drill 
through the outside of the housing to get access to the void and then 
seal the outside shell somehow.  You'd also want to measure twice before 
drilling...I think there's only about a 6-8mm void between the seals.

Jon


On 4/10/2017 7:30 PM, Sean T. Stevenson via Personal_Submersibles wrote:
>
> Is it possible to drill and port a channel to the inter-seal volume on 
> one of those motors?
>
> Sean
>