[PSUBS-MAILIST] Minn-Kota Shaft Seals

[Jon Wallace via Personal_Submersibles]

Cliff, no problem busting the seals and putting in new ones but my 
question is how to get them out given that the brass shaft bushing is 
installed on the other side and so I can't knock them out from behind.

Jon


On 4/10/2017 12:19 PM, Cliff Redus via Personal_Submersibles wrote:
> Jon, my experience is due to the interference fit, no matter what you 
> do you are going to damage the two lips seals removing them.  I just 
> accept this and buys new ones which are cheap.  When installing, I use 
> an arbor press with a socket that just fits the 1.125" ID of the 
> Minn-Kota 101 brushed end housing and press in the seals.
>
> cliff