[PSUBS-MAILIST] Minn-Kota Shaft Seals

[Jon Wallace via Personal_Submersibles]

The brass shaft bushing is installed from that side and it looks like 
that is press-fit in as well so I can't knock the seals out from the 
back side unless the bushing comes out first.  However, I can't knock 
the bushing out from the water-side of the housing because the seals are 
in the way.  Need a photo?

Jon


On 4/10/2017 12:04 PM, Brian Cox via Personal_Submersibles wrote:
> Jon,   I have just recently have been educated on seals myself.  They really need to be tapped out from the opposite side.  A big socket works good to distribute the force evenly.
>
> Brian
>