[PSUBS-MAILIST] Motor Pod

[hank pronk via Personal_Submersibles]

Brian,How close are you to a working sub?  Hank 

    On Saturday, April 8, 2017 4:00 PM, Brian Cox via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
 

 Alan,               Good eye Alan,  the shop forgot to put the cotter pin hole in the shaft ! Brian

--- personal_submersibles at psubs.org wrote:

From: Alan via Personal_Submersibles <personal_submersibles at psubs.org>
To: Personal Submersibles General Discussion <personal_submersibles at psubs.org>
Subject: Re: [PSUBS-MAILIST] Motor Pod
Date: Sun, 9 Apr 2017 08:06:06 +1200

Brian,I can't see a split pin in front of the propeller nut!May be just hard to view, but I remember Alec lost a prop, I think while reversing.Alan

Sent from my iPad
On 9/04/2017, at 6:48 AM, Brian Cox via Personal_Submersibles <personal_submersibles at psubs.org> wrote:


Hi Everybody,                            I finished my Port side motor pod.  Did a pressure test up to 10psi ,  still waiting on the silicone oil .  But it ran really smooth, had a bit of trouble when I machined the end caps, they weren't totally perfect, think I'll have the machine shop make a stab at it .  There were difficult to line up in my lathe and they were literally at the very maximum size my lathe could do.  But all my snap rings and o rings and epoxy thru hulls are good to go ! Pics:

<Pod1.jpg>

<Pod2.jpg>

<Pod3.jpg>

<Pod4.jpg>

<Pod5.jpg>

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

_______________________________________________Personal_Submersibles mailing listPersonal_Submersibles at psubs.orghttp://www.psubs.org/mailman/listinfo.cgi/personal_submersibles_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles


   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20170409/2ab39dee/attachment.html>