[PSUBS-MAILIST] Test chamber

[emile via Personal_Submersibles]

I can get my hands on such a test chamber. But don’t know the excact size and pressure.  The walls are ok with  about 2”but don’t know if the closure will hold 350 Bar.

 

Emile

 

Van: Personal_Submersibles [mailto:personal_submersibles-bounces at psubs.org] Namens hank pronk via Personal_Submersibles
Verzonden: vrijdag 9 september 2016 13:54
Aan: Personal Submersibles General Discussion
Onderwerp: Re: [PSUBS-MAILIST] Test chamber

 

Scott,

How did you make out with a HP test chamber

Hank

 

On Thursday, September 1, 2016 12:54 PM, Scott Waters via Personal_Submersibles <personal_submersibles at psubs.org> wrote:

 

 

I need to buy or make a testing chamber for testing parts for Pisces VI. It needs to go up to 5,000 psi. I need to to be 24" diameter and 36" long or bigger. Something pre-made and as low cost as possible is prefered, but I am assuming I will have to make it. Any suggestions? 

Thank you,

Scott Waters

 

 

Sent from my U.S. Cellular® Smartphone


_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20160909/43e194ba/attachment.html>