[PSUBS-MAILIST] machining

[Emile van Essen via Personal_Submersibles]

Hi Hank,

 

The tool does not exist. A profiled drill could do the job. Maybe you can
use a drill that is meant for allen screw pot holes.

 

Emile

 

  _____  

Van: Personal_Submersibles [mailto:personal_submersibles-bounces at psubs.org]
Namens hank pronk via Personal_Submersibles
Verzonden: zondag 20 maart 2016 20:00
Aan: Personal Submersibles General Discussion
Onderwerp: [PSUBS-MAILIST] machining

 

Hi All,

I need machining info, I am looking for a tool (drill?)  that can drill a
hole and make a o- ring seat at the same time.  Is there such a tool or do I
make one?

Hank

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20160320/e4486dce/attachment.html>