[PSUBS-MAILIST] amp gauge

[hank pronk via Personal_Submersibles]

Alan,The amp rating is 100a  I am drawing 14a with both motors running.  They are not gear head motors.  Does the voltage matter?  Hank 

    On Saturday, June 18, 2016 3:23 PM, Alan James via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
 

 Hank,I have a couple of those external shunts & there is only a maximum amp rating printed on them.The voltage can vary depending on the state of charge anyway.What are you drawing at full power? Are the motors geared?Alan


      From: hank pronk via Personal_Submersibles <personal_submersibles at psubs.org>
 To: Personal Submersibles General Discussion <personal_submersibles at psubs.org> 
 Sent: Sunday, June 19, 2016 2:15 AM
 Subject: [PSUBS-MAILIST] amp gauge
  
I am wondering if the amp gauge in Gamma is reading correctly.  Gamma was a 24v system and I have 36 v going through the amp bar and reading the amps from the original gauge.  Does the increased voltage impact the amp reading?Hank
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles


   
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles


  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20160618/509f321a/attachment.html>