[PSUBS-MAILIST] Jon's new penetrators

[Jon Wallace via Personal_Submersibles]

I found a reference to it online.  Since these are non-rotating parts it 
looks like Class 3 or 4 would work, but I suspect the snugness at any 
given moment of time will depend upon temperature with very close 
tolerances.

Jon


On 2/15/2016 10:25 AM, Sean T. Stevenson via Personal_Submersibles wrote:
>
> Jon, do you have a copy of the Machinery's Handbook? Standard fits and 
> tolerances for hole based and shaft based fits in nominal sizes in 
> both inch and metric are covered. I can look it up for you on Tuesday 
> if you like. Regardless, get a copy of that book if you don't have one.
>
> Sean
>
>