[PSUBS-MAILIST] Jon's new penetrators

[hank pronk via Personal_Submersibles]

Jon,That is perfect in my opinion.  As for that tool on you tube, it is longer than a tap alright.  I am confident that 2 inches of thread is sufficient with epoxy in the unthreaded portion.Hank 

    On Tuesday, February 9, 2016 12:32 PM, Jon Wallace via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
 

  
 Yes.  See attachment.
 
 
 On 2/9/2016 2:11 PM, Alan James via Personal_Submersibles wrote:
  
  Hank, once the external wires are soldered to the pins, how are you intending that it is waterproofed. IE is Jon going to pot over the wires, wire sheath & delrin.  If so what is going to adhere well to the delrin? Cheers Alan 
   
 
 
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles


  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20160209/61048259/attachment-0001.html>