[PSUBS-MAILIST] Electrical thru-hull

[Jon Wallace via Personal_Submersibles]

That's the intent but I doubt there's a stock size that will fit, the 
delron shaft will have to be turned to the right diameter and cut to the 
proper length.  Then I need to decide whether to use an o-ring that 
seats against the outside face of the thru-hull or have two 
circumferential o-ring grooves turned onto the shaft to act as the seal.

On 2/8/2016 10:15 AM, Brian Cox via Personal_Submersibles wrote:
> Jon,    Does the Delron fit into the machined bore of the thru hull?
> Brian
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20160208/c311a553/attachment.html>