[PSUBS-MAILIST] Electrical thru-hull

[Jon Wallace via Personal_Submersibles]

Hank, I need penetrators for 36vdc power to motors (50amp), 12vdc power 
to lights (20amp), and other small electronic sensors.   Any thoughts 
about delron or nylon as a body for machining.  Attached is a design for 
threaded rod through delron that I came up.  The nuts on the threaded 
rod probably not necessary if locktite or epoxy is used on the threads 
before driving it into the thru-hull body.

Jon



On 2/6/2016 2:24 PM, hank pronk via Personal_Submersibles wrote:
> Jon,
> What do you have to work with in terms of hole in hull. What amp are 
> you trying to run through.
> Hank
>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20160207/7743c96e/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: thru-hull-3.png
Type: image/png
Size: 5552 bytes
Desc: not available
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20160207/7743c96e/attachment.png>