[PSUBS-MAILIST] Electrical thru-hull

[T Novak via Personal_Submersibles]

Hey Hank,

While you build the penetrators for Jon could you take a few pics and post them along with written details on the project site? 

Alan, you as well, please.

Tim

 

From: Personal_Submersibles [mailto:personal_submersibles-bounces at psubs.org] On Behalf Of hank pronk via Personal_Submersibles
Sent: Saturday, February 6, 2016 2:35 PM
To: Personal Submersibles General Discussion <personal_submersibles at psubs.org>
Subject: Re: [PSUBS-MAILIST] Electrical thru-hull

 

Hi Jon,

You have a couple of options, you can machine a piece to fit with an o-ring groove in it and make a penetrator from that or you could thread your opening  and make a penetrator to fit that.  How many wires do you need to go through?    I would not use a smooth rod in a home made penetrator.  I always use a small threaded rod and have had good success.  I tested the two I made for Gamma to well over 600 psi and they were perfect.  If you like I am happy to make you a couple to fit your bore.  Just get me the exact measurement of the bore.  You have been very helpful to me and others so it would be a pleasure to help you out.

Hank

 

On Saturday, February 6, 2016 2:49 PM, Jon Wallace via Personal_Submersibles <personal_submersibles at psubs.org <mailto:personal_submersibles at psubs.org> > wrote:

 


Hank, 

See attached.  It's just a smooth bored thru-hull sealed on the outside face by an o-ring.

Jon




On 2/6/2016 2:24 PM, hank pronk via Personal_Submersibles wrote:


Jon,
What do you have to work with in terms of hole in hull. What amp are you trying to run through.
Hank

 


  _____  


 

 

 

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org <mailto:Personal_Submersibles at psubs.org> 
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20160206/53eebc0a/attachment.html>