[PSUBS-MAILIST] MK101 oil compensation tap

[Jon Wallace via Personal_Submersibles]

Cliff, a lot of threads on the MK101 to Subconn adapter.  How are you 
going to handle wire twisting when you screw in the adapter...pre-twist 
in the opposite direction?

On 5/20/2015 7:07 PM, Cliff Redus via Personal_Submersibles wrote:
>  Small Tygon flexible tube filled with oil.  No holes in housing.  On 
> the SS part that screws into the side of the housing, I have a 1/4" 
> tubing with Swagelok compression fitting.  I will connect to this port.
>
> Cliff
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20150520/90d29e4b/attachment.html>