[PSUBS-MAILIST] MK 101 shaft thread

[Jon Wallace via Personal_Submersibles]

Yes, thanks for the clarification Alec...the threaded shaft where the 
two electrical wires come out of the MK101 motor body.

Jon


On 4/22/2015 9:11 PM, Alec Smyth via Personal_Submersibles wrote:
> I think maybe Jon is asking about the mounting shaft as opposed to the 
> prop shaft. Jon, that's 1 1/8" X 18 straight thread.
>
> Best,
>
> Alec
>
> On Wed, Apr 22, 2015 at 2:18 PM, Cliff Redus via Personal_Submersibles 
> <personal_submersibles at psubs.org 
> <mailto:personal_submersibles at psubs.org>> wrote:
>
>     Jon the shaft on the MK-101 is 1/2" diameter nominal (0.495"
>     actual) with a threaded stud on the end that has a UNF 3/8-24 thread.
>
>
>     Cliff
>
>
>
>
>
>     Cliff Redus
>     Redus Engineering
>     USA mobile: 830-931-1280 <tel:830-931-1280>
>     cliffordredus at sbcglobal.com <mailto:cliffordredus at sbcglobal.com>
>
>     ------------------------------------------------------------------------
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20150422/f89c56df/attachment.html>