[PSUBS-MAILIST] cue ball arm

[Hugh Fulton via Personal_Submersibles]

Hi Hank,
Do you or anyone else, have a cross section of the cue-ball, glands, and arm
mechanism anywhere?
I would like to have a look at the seal side as well.  We make ball valves
and have done a lot of work on different designs of seals. 
Might be able to come up with one that is easier to move.  We use an oxygen
grease which is magic for reducing friction. Goes under the name of
"slippery pooze" here in the workshop.
Regards, Hugh.


-----Original Message-----
From: Personal_Submersibles [mailto:personal_submersibles-bounces at psubs.org]
On Behalf Of hank pronk via Personal_Submersibles
Sent: Saturday, 29 November 2014 5:42 a.m.
To: personal_submersibles at psubs.org
Subject: [PSUBS-MAILIST] cue ball arm

Hi Alan,
I just added a picture of the cue ball arm, ball assembly, installed on
Gamma.  You can see the range of motion and how it mounts to the sub.
Hank
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
 

__________ Information from ESET NOD32 Antivirus, version of virus signature
database 10797 (20141128) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com
 
 

__________ Information from ESET NOD32 Antivirus, version of virus signature
database 10797 (20141128) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com