[PSUBS-MAILIST] Rolled steel

[Hugh Fulton via Personal_Submersibles]

Go with 3/8” thick it doesn’t buckle as much as ¼”  

The guys who welded my 5/16” said that it would have been half the time with 3/8”.  That is why ABS says minimum 3/8” I believe.

Best,  Hugh

 

From: Personal_Submersibles [mailto:personal_submersibles-bounces at psubs.org] On Behalf Of swaters via Personal_Submersibles
Sent: Tuesday, 17 June 2014 3:22 p.m.
To: personal_submersibles at psubs.org
Subject: [PSUBS-MAILIST] Rolled steel

 

Hey guys,

I got a quote back from Arntzen on a K-250 hull.

The quote is to roll, tack seam, and reroll to round. 36"diameter and 48" long of 1/4" ASME 516 gr 70.

They will do it for $575 and a 2 week lead time.

Thanks,

Scott Waters

 

 

 

 

Sent from my U.S. Cellular© Smartphone



__________ Information from ESET NOD32 Antivirus, version of virus signature database 9956 (20140617) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20140617/aa194479/attachment.html>