[PSUBS-MAILIST] Rotary Seal

[Alan James via Personal_Submersibles]

Hank,am not going more than 3000rpm.Alan
      From: hank pronk via Personal_Submersibles <personal_submersibles at psubs.org>
 To: Personal Submersibles General Discussion <personal_submersibles at psubs.org> 
 Sent: Tuesday, December 2, 2014 2:54 PM
 Subject: Re: [PSUBS-MAILIST] Rotary Seal
   
Alan,
It seems that trolling motor seals work pretty good, what about them.  Are you planning a high rpm?  
Hank
--------------------------------------------
On Mon, 12/1/14, Alan James via Personal_Submersibles <personal_submersibles at psubs.org> wrote:



 Subject: [PSUBS-MAILIST] Rotary Seal
 To: "Personal Submersibles General Discussion" <personal_submersibles at psubs.org>
 Received: Monday, December 1, 2014, 8:44 PM
 
 Has anybody got any recomendations on a rotary
 seal type for my thruster propeller shaft. Looked at the Parker
 seal pdf & there seems a lot of options.I am wanting to oil compensate using the 3 cst
 silicone oil that Carsten recomended,& intend to have about 4 psi internal pressure
 above ambient.ThanksAlan
 -----Inline Attachment Follows-----
 
 _______________________________________________
 Personal_Submersibles mailing list
 Personal_Submersibles at psubs.org
 http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
 

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20141202/f495eab9/attachment-0001.html>