[PSUBS-MAILIST] Fwd: Help

[swaters]

The blue print shows a mechanical seal with out the spring. I am confused why Kitteredge used different seals than the trusters for the main motor. It is to late to change it though because I already have it set up according to the blue prints. 
The OD of the seal is 1.85" and the depth of the cavity for the seal is .34". The rotating shaft is 7/8".
Thanks,
Scott Waters




Sent from my U.S. Cellular© SmartphoneAlec Smyth <alecsmyth at gmail.com> wrote:It does not appear (per Google) that there is any such thing as a John Crane #883. But here's a typical mechanical seal for a pump, and in this case for a .875" shaft. 

http://www.mcmaster.com/#9281k256/=og76kj


On Tue, Sep 10, 2013 at 2:33 PM, swaters <swaters at waters-ks.com> wrote:
It is a type 883, .875 shaft seal -J CRANE Packing Co. 
I think that is right but the kitteredge blue prints are so hard to read after being copied over and over.
Thanks,
Scott Waters




Sent from my U.S. Cellular© Smartphone

"Smyth, Alec" <Alec.Smyth at covisint.com> wrote:
Scott, do you have any part number, specs, etc.? Sorry, I don’t have K-350 drawings.

 

From: Personal_Submersibles [mailto:personal_submersibles-bounces at psubs.org] On Behalf Of swaters
Sent: Monday, September 09, 2013 7:53 PM
To: personal_submersibles at psubs.org
Subject: [PSUBS-MAILIST] Fwd: Help

 

 

 

 

 

 

Sent from my U.S. Cellular© Smartphone




-------- Original message --------
Subject:Help
From:swaters <swaters at waters-ks.com>
To:personal_submersibles at psubs.org
Cc:


In trying to finalize my sub I realized the seals I ordered for the thrusters are not the same as for the main motor. Does anyone know where to get the seal for the main motor? Please help.

Thanks,

Scott Waters

 

 

 

 

Sent from my U.S. Cellular© Smartphone


_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20130910/8bfc1691/attachment.html>