[PSUBS-MAILIST] Fwd: Help

[swaters]

It is a type 883, .875 shaft seal -J CRANE Packing Co. 
I think that is right but the kitteredge blue prints are so hard to read after being copied over and over.
Thanks,
Scott Waters




Sent from my U.S. Cellular© Smartphone"Smyth, Alec" <Alec.Smyth at covisint.com> wrote:Scott, do you have any part number, specs, etc.? Sorry, I don’t have K-350 drawings.
 
From: Personal_Submersibles [mailto:personal_submersibles-bounces at psubs.org] On Behalf Of swaters
Sent: Monday, September 09, 2013 7:53 PM
To: personal_submersibles at psubs.org
Subject: [PSUBS-MAILIST] Fwd: Help
 
 
 
 
 
 
Sent from my U.S. Cellular© Smartphone



-------- Original message --------
Subject:Help
From:swaters <swaters at waters-ks.com>
To:personal_submersibles at psubs.org
Cc:


In trying to finalize my sub I realized the seals I ordered for the thrusters are not the same as for the main motor. Does anyone know where to get the seal for the main motor? Please help.
Thanks,
Scott Waters
 
 
 
 
Sent from my U.S. Cellular© Smartphone
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20130910/969e547f/attachment-0001.html>